Setup via IP AP Mode
The smart plugs have what is known as an access point (AP) mode, in which they broadcast their own SSID on the 2.4-GHz Wi-Fi network. The SSID consists of the respective plug name and the Wi-Fi MAC address to allow for unique identification when multiple devices are in use.
Commissioning
1. Plug in the smart plug
Plug the ALL3079 smart plug into an outlet. The device will automatically start up in access point (AP) mode.
2. Plug in the smart plug
Connect to Wi-Fi Use a Wi-Fi-enabled device (PC, laptop, smartphone, or tablet). Open the Wi-Fi settings and select the Wi-Fi network provided by the smart plug.
WLAN SSID Structure: ALL3079_818C580039557FE
The SSID consists of the product name (ALL3079) and a unique identifier made up of parts of the Wi-Fi MAC address. This allows for unique identification when multiple smart plugs are in use.
3. Enter the Wi-Fi password
Default Wi-Fi password: Allnet7652
4. Open a web browser
Open a web browser (such as Chrome, Firefox, or Edge) on your device.
5. Access the WebGUI
Enter the following IP address in the browser's address bar: http://192.168.4.4 After a short while, the Smart Plug's web interface (WebGUI) will appear.
6. Select Operating Mode
Using the "Basic" or "Advanced" menu options, you can switch between operating modes and configure the desired settings.
Click "Basic" or "Advanced" to switch between modes. Click the
The default Wi-Fi password Allnet7652 is the same for all smart plugs in the ALL3079 series. For security reasons, we strongly recommend changing the Wi-Fi password after initial setup to prevent unauthorized access.
To integrate the ALLNET plugs into your existing Wi-Fi network, you must configure them under "Mode: Advanced" on the "General Settings" page.